Application of 3D-Printed Personalized Guide for Lateral Femoral Positioning in Anterior Cruciate Ligament Reconstruction of the Knee.

Objective: This research aims to investigate the effectiveness of 3D computer-assisted customized guided positioning of the lateral femoral tunnel compared to conventional methods for Anterior Cruciate Ligament (ACL) reconstruction surgery. Methods: A total of 80 patients with a complete ACL tear who underwent arthroscopic reconstruction with autologous tendon transplantation (semitendinosus-gracilis tendon) were included in this study. The patients were admitted to our hospital between March 2020 and January 2022 and were randomly divided into two groups: the conventional group (n = 40) and the personalized guide group (n = 40), based on the positioning method. The conventional group underwent ACL restoration using standard surgical techniques, while the personalized guide group opted for the more precise computer-assisted personalized guide method. The lateral femoral tunnel times were compared between both groups. Additionally, the International Knee Documentation Committee (IKDC) and Lysholm scores were assessed, and the lateral femoral location was evaluated using X-ray imaging at 2 weeks postoperatively. Results: After surgery, both groups showed a statistically significant increase (P < .05) in Lysholm and IKDC scores compared to their pre-surgery scores. However, the two groups had no evident difference (P > .05). X-ray evaluation at 2 weeks post-surgery revealed no significant difference between the two groups in NL/ML, AL/BL, α, and ß angles (P > .05). The preparation time for the femoral tunnel was significantly shorter in the personalized guide group (6.18 ± 0.92 min) compared to the traditional group (15.94 ± 3.12 min) (P < .05). Conclusions: The computer-assisted 3D personalized guide positioning method is more effective in locating the lateral femoral tunnel for ACL reconstruction of the knee and can substantially reduce the positioning time. This study provides valuable insights for clinicians when selecting surgical methods.

Predicting Rates of Angular Correction After Hemiepiphysiodesis in Patients With X-Linked Hypophosphatemic Rickets.

PURPOSE: Patients with X-linked hypophosphatemic rickets (XLH) often develop coronal plane knee deformities despite medical treatment. Hemiepiphysiodesis is an effective way to correct coronal plane knee deformities in skeletally immature patients, but a full understanding of the rate of angular correction after hemiepiphysiodesis in XLH patients, compared with idiopathic cases is lacking. METHODS: We retrospectively reviewed charts of 24 XLH patients and 37 control patients without metabolic bone disease who underwent hemiepiphysiodesis. All patients were treated with standard-of-care medical therapy (SOC=active vitamin D and phosphate salt supplementation) in our clinical research center and had a minimum of 2-year follow-up after hemiepiphysiodesis. Demographic data as well as complications, repeat procedures, or recurrence/overcorrection were recorded. Standing lower extremity radiographs were evaluated before the surgical intervention and at subsequent hardware removal or skeletal maturity, whichever came first. Mean axis deviation, knee zone, mechanical lateral distal femoral angle (mLDFA), and medial proximal tibial angle were measured on each radiograph. The rate of angular correction was calculated as the change in mLDFA and medial proximal tibial angle over the duration of treatment. RESULTS: The magnitude of the initial deformity of the distal femur was greater in XLH patients as compared with control for varus (XLH mLDFA 97.7 +/- 4.9 vs. Control mLDFA 92.0 +/- 2.0 degrees) and valgus (XLH mLDFA 78.7 +/- 6.2 vs. Controls mLDFA 83.6 +/- 3.2 degrees). The rate of correction was dependent on age. When correcting for age, XLH patients corrected femoral deformity at a 15% to 36% slower rate than control patients for the mLDFA (>3 y growth remaining XLH 0.71 +/- 0.46 vs. control 0.84 +/- 0.27 degrees/month, <3 y growth remaining XLH 0.37 +/- 0.33 vs. control 0.58 +/- 0.41 degrees/month). No significant differences were seen in the rate of proximal tibia correction. XLH patients were less likely to end treatment in zone 1 (55.0% XLH vs. 77.8% control). XLH patients had longer treatment times than controls (19.5 +/- 10.7 vs. 12.6 +/- 7.0 mu, P value <0.001), a higher average number of secondary procedures than controls (1.33 +/- 1.44 vs. 0.62 +/- 0.92 number of procedures), a higher rate of overcorrection than controls (29.2% vs. 5.4%), and a higher rate of subsequent corrective osteotomy than controls (37.5% vs. 8.1%). There was no significant difference in the rate of complications between groups (8.3% vs. 5.4%). CONCLUSIONS: Patients with XLH undergoing hemiepiphysiodesis have a 15% to 36% slower rate of femoral deformity correction that results in longer treatment times, a higher likelihood to undergo more secondary procedures, and a lower likelihood to reach neutral mechanical alignment. SIGNIFICANCE: This study provides important information to guide the timing and treatment of patients with XLH and coronal plane knee deformities. In addition, results from this study can be educational for families and patients with respect to anticipated treatment times, success rates of the procedure, complication rate, and likelihood of needing repeat procedures.

More anatomic tunnel placement for anterior cruciate ligament reconstruction by surgeons with high volume compared to low volume.

PURPOSE: Correct placement of the femoral and tibial tunnels in the anatomic footprint during anterior cruciate ligament reconstruction (ACLR) is paramount for restoring rotatory knee stability. Recent studies have looked at surgeon volume and its outcomes on procedures such as total knee arthroplasty and infection rates, but only few studies have specifically examined tunnel placement after ACLR based on surgeon volume. The purpose of this study was to compare the placement of femoral and tibial tunnels during ACLR between high-volume and low-volume surgeons. It was hypothesized that high-volume surgeons would have more anatomic tunnel placement compared with low-volume surgeons. METHODS: A retrospective review of all ACLR performed between 2015 and 2019 at an integrated health care system consisting of both academic and community hospitals with 68 orthopaedic surgeons was conducted. Surgeon volume was categorized as less than 35 ACLR per year (low volume) and 35 or more ACLR per year (high volume). Femoral tunnel placement for each patient was determined using an exact strict lateral radiograph (less than 6 mm of offset between the posterior halves of the medial and lateral condyles) taken after the primary ACLR using the quadrant method. The centre of the femoral tunnel was measured in relation to the posterior-anterior (PA) and proximal-distal (PD) dimensions (normal centre of anatomic footprint: PA 25% and PD 29%). Tibial tunnel placement for each patient was determined on the same lateral radiographs by measuring the mid-sagittal tibial diameter and the centre of the tibial attachment area of the ACL from the anterior tibial margin (normal centre of anatomic footprint: 43%). Each lateral radiograph was reviewed by one of two blinded reviewers. RESULTS: A total of 4500 patients were reviewed, of which 645 patients met all the inclusion/exclusion criteria and were included in the final analysis. There were 228 patients in the low-volume group and 417 patients in the high-volume group. Low-volume surgeons performed a mean of 5 ACLRs per year, whereas surgeons in the high-volume group performed a mean of 40 ACLRs per year. In the PA dimension, the low-volume group had significantly more anterior femoral tunnel placement compared with the high-volume group (32 ± 10% vs 28 ± 9%, p < 0.01). In the PD dimension, the low-volume group had statistically significant more proximal femoral tunnel placement compared to the high-volume group (32 ± 9% vs 35 ± 9%, p < 0.01). For the tibial tunnel, the low-volume group had significantly more posterior tibial tunnel placement compared with the high-volume group (41 ± 10% vs 38 ± 7%, p < 0.01). CONCLUSION: Low-volume surgeons placed their femoral tunnels significantly more anterior and proximal (high) during ACLR, and placed their tibial tunnels significantly more posterior, compared with high-volume surgeons. Prior research has indicated that anatomic placement of the femoral and tibial tunnels during ACLR leads to improved rotatory knee stability. The findings of this study demonstrate the importance of surgical volume and experience during ACLR. LEVEL OF EVIDENCE: III.

The STRYDE limb lengthening nail is susceptible to mechanically assisted crevice corrosion: an analysis of 23 retrieved implants.

Background and purpose - We noted several adverse events in patients in whom the first version of the STRYDE limb-lengthening nail (NuVasive Specialized Orthopaedics, San Diego, CA) had been implanted. Pain, osteolysis, periosteal reactions, and cortical hypertrophy at the nail junction were noted. Here, we present the analysis of 23 retrieved STRYDE implants.Materials and methods - We undertook visual inspection of the retrieved nails and screws, mechanical evaluation of the junction, micro-CT analyses, microscopic inspection of the bushing, screws, screw holes, and separated parts of the implants. Positive material identification (PMI) and energy-dispersive X-ray spectroscopy (EDS) were used to analyze the chemical composition. The hardness of the material was also investigated.Results - 20/23 retrieved nails had visible signs of corrosion, i.e., discoloration at the telescopic junction. Micro-CT verified corrosion attacks in 12/12 scanned bushings. Corrosion, predominantly mechanically assisted crevice corrosion, was observed at the locking screws and screw holes in 20/23 nails. Biological material inside the nail was observed in addition to oozing from the junction of 2 nails during hardware removal, which was experimentally reproducible. Notably, the mechanical construction of the bushing changed from PRECICE P2 to STRYDE nails.Interpretation - STRYDE nails are not hermetically sealed, and liquid can pass the bushing. Biodur 108 itself is corrosion resistant; however, mechanically assisted crevice corrosion of the bushing, locking screws, and screw holes may be aggravated due to manufacturing aiming for increased strength and hardness of the alloy.Observing several adverse events, we recently published a nationwide cross-sectional analysis of all 30 STRYDE limb- lengthening nails (NuVasive, Specialized Orthopedics, San Diego, CA) that were implanted in Denmark (Rölfing et al. 2021a). 27/30 STRYDE nails have now been removed and we present data from metallurgical analysis of 23 of the retrieved implants.

Bone mineral density changes in a free vascularised fibular graft in the distal femoral bone after osteosarcoma in a 10-year-old boy: a 7-year follow-up.

A 10-year-old boy presented with continuous reports of pain located to the left knee. Imaging revealed a sclerotic process in the left distal femur, and biopsies were consistent with chondroblastic osteosarcoma. As part of standard treatment the patient underwent neoadjuvant chemotherapy followed by limb sparring surgery and adjuvant chemotherapy. The entire tumour was excised and femoral bone reconstruction was performed with a double barrel free vascularised fibular graft. Bone mineral density (BMD) can be decreased in childhood survivors of cancer. The patient was followed for 7 years with dual-energy X-ray absorptiometry scans in order to assess BMD and graft adaption. Despite two accidental fractures to the graft region local and global BMD underwent an overall increase. Approximately 7 years after tumour resection the patient had a global Z-score of 0.2, which is considered within normal range.

Genipin and insulin combined treatment improves implant osseointegration in type 2 diabetic rats.

BACKGROUND: Type 2 diabetes mellitus (T2DM) has a harmful effect on the stability and osseointegration of dental implants. T2DM induces mitochondrial damage by inhibiting AMPK signaling, resulting in oxidative stress and poor osteogenesis in the peri-implant bone area. Genipin is a major component of gardenia fruits with strong antioxidant, anti-inflammation, and antidiabetic actions, and it also can activate mitochondrial quality control via the AMPK pathway. The purpose of this study was to investigate the effects of genipin and insulin treatment on implant osseointegration in T2DM rats and explore the underlying mechanisms. METHODS: Streptozotocin-induced diabetic rats received implant surgery in their femurs and were then assigned to five groups that were subjected to different treatments for three months: control group, T2DM group, insulin-treated T2DM group (10 IU/kg), genipin-treated T2DM group (50 mg/kg), and the genipin and insulin combination-treated T2DM group. Then, we regularly assessed the weight and glucose levels of the animals. Rats were euthanized at 3 months after the implantation procedure, and the femora were harvested for microscopic computerized tomography analysis, biomechanical tests, and different histomorphometric assessment. RESULTS: The results indicated that the highest blood glucose and oxidative stress levels were measured for the T2DM group, resulting in the poorest osseointegration. The combination-treated T2DM group mitigated hyperglycemia and normalized, reactivated AMPK signaling, and alleviated oxidative stress as well as reversed the negative effect of osseointegration. There were beneficial changes observed in the T2DM-genipin and T2DM-insulin groups, but these were less in comparison to the combination treatment group. CONCLUSION: Our study suggests that treatment with genipin in combination with insulin could be an effective method for promoting implant osseointegration in T2DM rats, which may be related to AMPK signaling.

In vivo performance of Al2O3-Ti bone implants in the rat femur.

BACKGROUND: Alumina-titanium (Al2O3-Ti) biocomposites have been recently developed with improved mechanical properties for use in heavily loaded orthopedic sites. Their biological performance, however, has not been investigated yet. METHODS: The aim of the present study was to evaluate the in vivo biological interaction of Al2O3-Ti. Spark plasma sintering (SPS) was used to fabricate Al2O3-Ti composites with 25 vol.%, 50 vol.%, and 75 vol.% Ti content. Pure alumina and titanium were also fabricated by the same procedure for comparison. The fabricated composite disks were cut into small bars and implanted into medullary canals of rat femurs. The histological analysis and scanning electron microscopy (SEM) observation were carried out to determine the bone formation ability of these materials and to evaluate the bone-implant interfaces. RESULTS: The histological observation showed the formation of osteoblast, osteocytes with lacuna, bone with lamellar structures, and blood vessels indicating that the healing and remodeling of the bone, and vasculature reconstruction occurred after 4 and 8 weeks of implantation. However, superior bone formation and maturation were obtained after 8 weeks. SEM images also showed stronger interfaces at week 8. There were differences between the composites in percentages of bone area (TB%) and the number of osteocytes. The 50Ti composite showed higher TB% at week 4, while 25Ti and 75Ti represented higher TB% at week 8. All the composites showed a higher number of osteocytes compared to 100Ti, particularly 75Ti. CONCLUSIONS: The fabricated composites have the potential to be used in load-bearing orthopedic applications.

Functional rehabilitation of a person with transfemoral amputation through guided motor imagery: a case study.

Background: Motor imagery (MI) is a mental technique, absent of physical movement, to foster movement patterns and relieve pain via a training model enacting the brain before the body. This case study assessed MI's efficacy in decreasing phantom limb pain and attaining functional gait and balance after lower extremity amputation. Description: The participant was a 71-year-old female with a transfemoral amputation seven years prior. She required a standard walker for ambulation. The participant underwent three sessions per week for four weeks of MI intervention, with immediate, post-test, and 1-week retention testing involving subjective and functional assessments. Intervention sessions involved quiet sitting with eyes closed while listening to the MI script. The scripts focused on functional movement patterns and tasks that were relevant to the participant, such as walking, balancing, and reaching. Each session's script focused on a different task. These scripts guided her through proper action and biomechanics of the skills to imagine herself moving safely and functionally. Outcomes: Short Form Berg Balance Scale and Tinetti Performance Oriented Mobility Assessment scores demonstrated clinically important and sustained improvement. Further, the participant reported decreased phantom limb pain and could walk a short distance independently for the first time in seven years. Discussion: MI is a time- and cost-effective, low-risk treatment option that decreased phantom pain and improved balance and functional gait in an individual with an amputation. The use of MI as an intervention for the rehabilitation of persons with amputation must be further examined.

Does the Capital Femoral Physis Bony MorphologyDiffer in Children with Symptomatic Cam-type Femoroacetabular Impingement.

BACKGROUND: The epiphyseal tubercle, the corresponding metaphyseal fossa, and peripheral cupping are key stabilizers of the femoral head-neck junction. Abnormal development of these features in the setting of supraphysiologic physeal stress under high forces (for example, forces that occur during sports activity) may result in a cam morphology. Although most previous studies on cam-type femoroacetabular impingement (FAI) have mainly focused on overgrowth of the peripheral cupping, little is known about detailed morphologic changes of the epiphyseal and metaphyseal bony surfaces in patients with cam morphology. QUESTIONS/PURPOSES: (1) Does the CT-based bony morphology of the peripheral epiphyseal cupping differ between patients with a cam-type morphology and asymptomatic controls (individuals who did not have hip pain)? (2) Does the CT-based bony morphology of the epiphyseal tubercle differ between patients with a cam-type morphology and asymptomatic controls? (3) Does the CT-based bony morphology of the metaphyseal fossa differ between patients with a cam-type morphology and asymptomatic controls? METHODS: After obtaining institutional review board approval for this study, we retrospectively searched our institutional database for patients aged 8 to 15 years with a diagnosis of an idiopathic cam morphology who underwent a preoperative CT evaluation of the affected hip between 2005 and 2018 (n = 152). We excluded 96 patients with unavailable CT scans and 40 patients with prior joint diseases other than cam-type FAI. Our search resulted in 16 patients, including nine males. Six of 16 patients had a diagnosis of bilateral FAI, for whom we randomly selected one side for the analysis. Three-dimensional (3-D) models of the proximal femur were generated to quantify the size of the peripheral cupping (peripheral growth of the epiphysis around the metaphysis), epiphyseal tubercle (a beak-like prominence in the posterosuperior aspect of the epiphysis), and metaphyseal fossa (a groove on the metaphyseal surface corresponding to the epiphyseal tubercle). A general linear model was used to compare the quantified anatomic features between the FAI cohort and 80 asymptomatic hips (aged 8 to 15 years; 50% male) after adjusting for age and sex. A secondary analysis using the Wilcoxon matched-pairs signed rank test was performed to assess side-to-side differences in quantified morphological features in 10 patients with unilateral FAI. RESULTS: After adjusting for age and sex, we found that patients with FAI had larger peripheral cupping in the anterior, posterior, superior, and inferior regions than control patients who did not have hip symptoms or radiographic signs of FAI (by 1.3- to 1.7-fold; p < 0.01 for all comparisons). The epiphyseal tubercle height and length were smaller in patients with FAI than in controls (by 0.3- to 0.6-fold; p < 0.02 for all comparisons). There was no difference in tubercle width between the groups. Metaphyseal fossa depth, width, and length were larger in patients with FAI than in controls (by 1.8- to 2.3-fold; p < 0.001 for all comparisons). For patients with unilateral FAI, we saw similar peripheral cupping but smaller epiphyseal tubercle (height and length) along with larger metaphyseal fossa (depth) in the FAI side compared with the uninvolved contralateral side. CONCLUSION: Consistent with prior studies, we observed more peripheral cupping in patients with cam-type FAI than control patients without hip symptoms or radiographic signs of FAI. Interestingly, the epiphyseal tubercle height and length were smaller and the metaphyseal fossa was larger in hips with cam-type FAI, suggesting varying inner bone surface morphology of the growth plate. The docking mechanism between the epiphyseal tubercle and the metaphyseal fossa is important for epiphyseal stability, particularly at early ages when the peripheral cupping is not fully developed. An underdeveloped tubercle and a large fossa could be associated with a reduction in stability, while excessive peripheral cupping growth would be a factor related to improved physeal stability. This is further supported by observed side-to-side differences in tubercle and fossa morphology in patients with unilateral FAI. Further longitudinal studies would be worthwhile to study the causality and compensatory mechanisms related to epiphyseal and metaphyseal bony morphology in pathogenesis cam-type FAI. Such information will lay the foundation for developing imaging biomarkers to predict the risk of FAI or to monitor its progress, which are critical in clinical care planning. LEVEL OF EVIDENCE: Level III, prognostic study.

Safety and Performance of Bone-Anchored Prostheses in Persons with a Transfemoral Amputation: A 5-Year Follow-up Study.

BACKGROUND: For almost 30 years, bone-anchored prostheses have offered an alternative solution to prosthetic sockets by attaching the artificial limb directly to the femoral residuum by means of an osseointegration implant. Osseointegration implant surgery was introduced in our center in 2009. The aim of the present study is to report on safety, prosthesis-wearing time, and health-related quality-of-life (HRQoL) for patients with femoral bone-anchored prostheses during a 5-year follow-up period. METHODS: All patients who underwent implantation of a press-fit osseointegration implant between May 2009 and November 2013 were eligible for the present study. Implantation was performed in 2 stages. Adverse events included infectious complications (grade 1 to 4), aseptic loosening, breakage, stoma-redundant tissue, and stoma hypergranulation. Prosthesis-wearing time and HRQoL were measured with the Questionnaire for Persons with a Transfemoral Amputation (Q-TFA) prosthetic use score and global score, respectively. RESULTS: Thirty-nine of 42 eligible patients were included. Thirty patients (77%) presented with some kind of infection (156 events in total), with 148 (95%) events being classified as grade 1 or 2 and 8 events (5%) being classified as grade 3; the latter 8 events occurred in 4 patients. There were no instances of septic loosening. The intramedullary stem of the osseointegration implant broke in 2 patients. In total, soft-tissue refashioning had to be done 30 times in 14 patients. The Q-TFA median prosthetic use and global scores improved significantly from 71 to 100 and from 33 to 75, respectively (p < 0.001). CONCLUSIONS: Despite the adverse events, patient prosthetic use and HRQoL improved significantly. Grade-1 and 2 infections were frequent but could mostly be treated with nonoperative measures. Most infections seemed to occur in the first 2 years and did not lead to deep infections. Two broken intramedullary stems were revised successfully. Current developments focus on reduction of infectious complications and prevention of osseointegration implant breakage. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Growth Modulation for Knee Coronal Plane Deformities in Children With Nutritional Rickets: A Prospective Series With Treatment Algorithm.

To report prospectively the radioclinical outcome of guided growth surgery for coronal plane deformities around the knee in young children with nutritional rickets on the intermediate term, to assess the responsiveness of torsional deformities of the tibias to guided growth regarding function and objective clinical parameters, and to propose a treatment algorithm. Methods: Fifty children (male:female, 27:23) with knee coronal plane deformities (knees:physes, 86:99), (varum:valgum, 51:35) secondary to nutritional rickets were subjected to femoral and/or tibial temporary hemiepiphysiodesis using a two-hole 8-plate. The mean age at implantation was 3.8 ± 1.5 years (range 2.5 to 5). The mean follow-up was 2.8 years (range 2 to 4). All children received a standing full-length AP radiographs of both lower limbs in neutral rotation to measure the mechanical axis deviation, tibiofemoral angle, and joint orientation angles. Tibial torsion was objectively assessed by measuring the bimalleolar axis. Results: The radiologic measurements, tibiofemoral angle, mechanical axis deviation, mechanical lateral distal femoral angle, medial proximal tibial angle, and Hilgenreiner-epiphyseal angle, showed a highly statistically significant improvement (P ≤ 0.001). Radiographic outcomes correlated with their clinical counterparts. The mean duration of correction of the mechanical axis was 10.8 ± 2.4 months (7 to 21). The mean follow-up for rebound of the deformity was 1.5 years (range 1 to 3). Conclusion: The radioclinical outcome is rewarding with a tolerable complication profile. The mechanical complications were mostly related to lengthy implant retainment encountered in severe deformities. Internal tibial torsion seems profoundly responsive to correction of coronal plane deformity. And, derotation osteotomies are rarely justified. Our proposed algorithm may be used as a decision-taking guide for achieving the desired growth modulation in a more efficient manner.

Evaluation of zoledronate, cytochalasin-D, and desferrioxamine on osseointegration in an intra-medullary femoral implant model.

OBJECTIVE: The rise in primary and revision surgeries utilizing joint replacement implants suggest the need for more reliable means of promoting implant fixation. Zoledronate-(Zol), cytochalasin-D-(cytoD), and desferrioxamine-(DFO) have been shown to enhance mesenchymal stem cell (MSC) differentiation into osteoblasts promoting bone formation. The objective was to determine whether Zol, cytoD, and DFO can improve fixation strength and enhance peri-implant bone volume about intra-medullary femoral implants. METHODS: 48 Sprague-Dawley female rats were randomized into four treatments, saline-control or experimental: Zol-(0.8 µg/µL), cytoD-(0.05 µg/µL), DFO-(0.4 µg/µL). Implants were placed bilaterally in the femoral canals following injection of treatment solution and followed for 28 days. Mechanical push-out testing and micro-CT were our primary evaluations, measuring load to failure and bone volume. Qualitative evaluation included histological assessment. Data was analyzed with a one-way ANOVA with Holm-Sidak mean comparison testing. RESULTS: Significant results included pushout tests showing an increase in maximum energy for Zol (124%) and cytoD (82%); Zol showed an increase in maximum load by 48%; Zol micro-CT showed increase in BV/TV by 35%. CONCLUSIONS: Our findings suggest that locally applied Zol and cytoD enhance implant mechanical stability. Bisphosphonates and actin regulators, like cytoD, might be further investigated as a new strategy for improving osseointegration.

Investigating changes in calcium, phosphorus, alkaline phosphatase, and 25-hydroxy Vitamin D after surgical repair of fractures of femur or tibia.

BACKGROUND: The recovery of long bones after fracture requires a specific process to restore the natu-ral bone anatomy as well as its proper function. Changes in calcium, phosphorus, alkaline phosphatase and 25-hydroxy vitamin D can be justified either in the fracture process or in the repair procedure. The aim of this sectional study is to investigate changes in all these compounds after the surgical repair of fractures of femur and tibia bones. MATERIALS AND METHODS: A random sample of 68 patients was selected from whom referring to a hospital with fractures of femur or tibia and candidate for repair surgery. The mentioned bone markers were measured at the time after surgery, six and twelve weeks after the surgery with laboratory-specific kits. A p-value, lower than 0.05, was considered to be statistically significant. RESULT: Of the patients, 34 were with fractures of femur and 34 were with fractures of tibia, equally. The patients were aged 2 to 69 with a mean age of 27.93 ± 14.8 years old. The means of calcium (p = 0.001) and phosphorus (p = 0.014) at three intervals were statistically significant difference. In contrast, the means serum alkaline phosphatase and vitamin D levels did not show any significant changes over time (p = 0.042). CONCLUSION: In conclusion, the means of calcium and phosphorus over the follow-up were statistically significant. The observed difference of vitamin D after the surgery, as well the level of alkaline phosphatase for femoral fracture between male and female are one of our important findings. (www.actabiomedica.it).

Comprehensive nursing based on feedforward control and postoperative FMA and SF-36 levels in femoral intertrochanteric fracture.

OBJECTIVE: To study the effect of comprehensive nursing based on the concept of feedforward control on postoperative FMA (Fugl-Meyer Assessment) and SF-36 (health status questionnaire) in patients with femoral trochanteric fracture. METHODS: 114 patients with femoral intertrochanteric fracture were enrolled in the study. Patients were divided into control group and observation group according to order of admission, 57 cases in each group. Both groups of patients received proximal femoral nail antirotation surgery, conventional nursing and feedforward control based comprehensive nursing. Nursing effects of the two groups of patients were compared. RESULTS: Anus first exhaust time, the time of getting out of bed and hospitalization time, and after nursing, SAS (Self-Rating Anxiety) and SDS (Self-Rating Depression) score of the observation group were significantly lower than those of the control group (p<0.05). FMA and SF-36 score of the observation group after surgical nursing were significantly higher than those of the control group (p<0.05). The total incidence of complications in the observation group was lower than that in the control group (p<0.05). CONCLUSIONS: Comprehensive care based on the concept of feedforward control has a better nursing effect for patients with intertrochanteric fracture, which can shorten the time of patient getting out of bed and hospitalization and reduce the incidence of post-complications.

Mechanical and numerical characterization of ceramic femoral components for hip resurfacing arthroplasty.

Hip resurfacing arthroplasty may have distinct advantages for young and active patients, but large metal-on-metal bearings can be associated with increased wear, adverse tissue reactions and higher rate of implant loosening. Ceramic wear couples are a commonly used alternative to metals and therefore might be an alternative for hip resurfacing arthroplastys. The aim of this study was to evaluate the mechanical strength of femoral components made of an alumina-toughened zirconia composite by means of experimental testing and finite element analysis. For the mechanical characterization, ceramic femoral components (Ø: 48 mm) were tested under compression loading experimentally until fracture occurred or a maximum load of 85 kN was obtained. The femoral components were either loaded against a ceramic cup or a copper ring (outer diameter Ø: 7.0 mm). In addition, the complex geometry of the ceramic femoral component was simplified, and only the stem was loaded in a cantilever test until fracture. In addition, the fracture tests were numerically simulated to investigate the influence of additional loading conditions and geometric parameters, which were not experimentally tested. The experimental data were used for validation of the finite element analysis. None of the tested ceramic femoral components fractured at a compression load of 85 kN when they were loaded against a ceramic cup at an inclination angle of 45°. When the femoral components were loaded against a copper ring, the femoral components fractured at 29.9 kN at a testing angle of 45°. The fracture load was reduced when an angle of 30° and increased when an angle of 60° was simulated. Using an experimental cantilever test, the stem of the femoral component fractured at 1124.0 N. When the stem length was increased or the diameter was reduced by 10% in the finite element analysis, the fracture load was reduced. Decreasing the length or increasing the diameter led to an increase of the fracture load. The strongest influence was found for the reduction of the transition radius of the stem, with a decrease of the fracture load up to 27.2%. The analyzed femoral components made of alumina-toughened zirconia (ATZ) showed sufficient mechanical capability to withstand high loadings during unfavorable loading conditions. However, further biomechanical and tribological investigations are required before clinical application.

Does Taper Design Affect Taper Fretting Corrosion in Ceramic-on-Polyethylene Total Hip Arthroplasty? A Retrieval Analysis.

BACKGROUND: Ceramic-on-polyethylene (CoP) implants have exhibited lower fretting and corrosion scores than metal-on-polyethylene implants. This study aims at investigating the effect of taper design on taper corrosion and fretting in modular CoP total hip arthroplasty (THA) systems. METHODS: Under an institutional review board--approved protocol, a query of an implant retrieval library from 2002 to 2017 identified 120 retrieved CoP THA systems with zirconia toughened alumina femoral heads. Femoral stem trunnions were visually evaluated and graded for fretting, corrosion, and damage at the taper interface. Medical records were reviewed for patient demographics and implant characteristics. Data were statistically analyzed using Spearman correlation and rank-sum tests with a Dunn's post hoc test, with a significance level of α = 0.05. RESULTS: Four different taper designs were evaluated: 11/13 (n = 18), 12/14 (n = 53), 16/18 (n = 21), and V40 (n = 28). There were no statistically significant demographic differences between taper groups for duration of implantation, laterality, patient age, and patient sex, but patients with 16/18 tapers had a higher body mass index than V40 tapers (P = .012). Duration of implantation had a weak positive correlation with both trunnion fretting (ρ = 0.224, P = .016) and corrosion (ρ = 0.253, P = .006). Summed fretting and corrosion scores were significantly greater on the V40 and 16/18 tapers compared with the 12/14 tapers (all P ≤ .001). CONCLUSION: Taper fretting and corrosion were observed in CoP THA implants and were greatest with V40 and 16/18 tapers and lowest with 12/14 tapers. Differences in taper design characteristics may lead to greater micromotion at the taper-head interface, leading to increased fretting and corrosion.

Results of 200 Consecutive Ceramic-on-Ceramic Cementless Hip Arthroplasties in Patients Up To 50 Years of Age: A 5-24 Years of Follow-Up Study.

BACKGROUND: Ceramic-on-ceramic (CoC) bearings due to their mechanical properties can be used in primary total hip arthroplasty (THA) especially in young patients requiring a long-lasting implant. The goal of this study is to analyze the results of a series of 200 consecutive CoC THAs in patients aged 50 years or less at the time of surgery. METHODS: A retrospective study was conducted on the first 200 consecutive CoC arthroplasties performed using the direct lateral approach on 105 females and 81 males (14 bilateral cases) with an average age of 44.2 (16-50) years. The diagnosis was primary or post-traumatic osteoarthritis in 94 cases, avascular necrosis of the femoral head in 47, displaced intracapsular femoral neck fracture in 29, osteoarthritis secondary to developmental dysplasia of the hip/Legg-Calvè-Perthes disease/slipped capital femoral epiphysis in 20, and rheumatic diseases in 10 cases. The preoperative Harris Hip Score was 32.5 on average (range 15-55). All the implants were cementless. In 177 THAs the coupling was alumina-on-alumina, and in 23 cases the coupling was AMC-on-AMC (alumina matrix composite). RESULTS: Twenty-five patients with 28 THAs were lost at the final follow-up, 2 stems were revised due to subsidence, 1 cup was revised due to malposition, 1 femoral head was changed because of impingement, and 1 THA was revised for periprosthetic infection. Three patients sustained a Vancouver B1 periprosthetic femoral fracture. At the final follow-up (mean 14.9 years; minimum 5 years to maximum 24 years), 172 THAs were eligible for clinical and radiographic evaluation: none was revised for wear and/or breakage of the ceramic components. Harris Hip Score rose up to a mean value of 90.1 (52-100). CONCLUSION: The present report demonstrates that CoC coupling offers excellent long-term results in THA performed in young patients with very low wear and no adverse effects caused by the material.

Establishment and effects of allograft and synthetic bone graft substitute treatment of a critical size metaphyseal bone defect model in the sheep femur.

Assessment of bone graft material efficacy is difficult in humans, since invasive methods like staged CT scans or biopsies are ethically unjustifiable. Therefore, we developed a novel large animal model for the verification of a potential transformation of synthetic bone graft substitutes into vital bone. The model combines multiple imaging methods with corresponding histology in standardized critical sized cancellous bone defect. Cylindrical bone voids (10 ml) were created in the medial femoral condyles of both hind legs (first surgery at right hind leg, second surgery 3 months later at left hind leg) in three merino-wool sheep and either (i) left empty, filled with (ii) cancellous allograft bone or (iii) a synthetic, gentamicin eluting bone graft substitute. All samples were analysed with radiographs, MRI, µCT, DEXA and histology after sacrifice at 6 months. Unfilled defects only showed ingrowth of fibrous tissue, whereas good integration of the cancellous graft was seen in the allograft group. The bone graft substitute showed centripetal biodegradation and new trabecular bone formation in the periphery of the void as early as 3 months. µCT gave excellent insight into the structural changes within the defects, particularly progressive allograft incorporation and the bone graft substitute biodegradation process. MRI completed the picture by clearly visualizing soft tissue ingrowth into unfilled bone voids and presence of fluid collections. Histology was essential for verification of trabecular bone and osteoid formation. Conventional radiographs and DEXA could not differentiate details of the ongoing transformation process. This model appears well suited for detailed in vivo and ex vivo evaluation of bone graft substitute behaviour within large bone defects.

Activity of fixed direct electrical current in experimental Staphylococcus aureus foreign-body osteomyelitis.

Fixed DC was compared to ceftriaxone, ceftriaxone with 200 µA fixed DC, or no treatment in a rat model of methicillin-susceptible Staphylococcus aureus foreign-body osteomyelitis. After 3 weeks, fewer bacteria were present in bones of the ceftriaxone group (5.71 log10cfu/g [P = 0.0004]) and the ceftriaxone/DC group (3.53 log10cfu/g [P = 0.0002]) than untreated controls (6.70 log10cfu/g). Fewer bacteria were present in the ceftriaxone/DC group than in the ceftriaxone-alone and DC-alone groups (P = 0.0012 and 0.0008, respectively). There were also fewer bacteria on the implanted wires in the groups treated with ceftriaxone (5.47 log10cfu/cm2) or ceftriaxone/DC (2.82 log10cfu/cm2) than in the untreated controls (6.44 log10cfu/cm2 [P = 0.0003 and 0.0002, respectively]). There were fewer bacteria in the ceftriaxone/DC rats than in the ceftriaxone-alone- and fixed DC-alone-treated rats (P = 0.0017 and 0.0016, respectively). Fixed DC with an antibiotic may be useful for treating foreign-body infections caused by S. aureus.

Eight respectively nine out of ten patients return to sport and work after distal femoral osteotomy.

PURPOSE: Distal femoral osteotomy (DFO) is a well-accepted procedure for the treatment of femoral deformities and associated symptoms including osteoarthritis, especially in younger and physically active patients in whom knee arthroplasty is undesirable. Still, there is an apparent need for evidence on relevant patient outcomes, including return to sport (RTS) and work (RTW), to further justify the use of knee osteotomy instead of surgical alternatives. Therefore, the purpose of the present study was to investigate the extent and timing of patients' RTS and RTW after DFO. METHODS: This monocentre, retrospective cohort study included consecutive DFO patients, operated between 2012 and 2015. Out of 126 eligible patients (18-70 years, 63% female), all patients responded, and 100 patients completed the questionnaire. Median follow-up was 3.4 years (range 1.5-5.2). The predominant indication for surgery was symptomatic unicompartmental osteoarthritis and valgus or varus leg alignment caused by a femoral deformity. The primary outcome measure was the percentage of RTS and RTW. Secondary outcome measures included time to RTS/RTW, sports level and frequency, the median pre-symptomatic and postoperative Tegner activity score (1-10, higher is more active) and the postoperative Lysholm score (0-100, higher is better). RESULTS: Out of 84 patients participating in sports preoperatively, 65 patients (77%) returned to sport postoperatively. Forty-six patients (71%) returned to sports within 6 months. Postoperative participation in high-impact sports was possible though less frequent compared to preoperative participation. Out of 80 patients working preoperatively, 73 (91%) returned to work postoperatively, of whom 59 patients (77%) returned within 6 months. The median pre-symptomatic Tegner activity score [4.0 (range 0-10)] was significantly higher (p < 0.01) than the reported Tegner score at follow-up [3.0 (range 0-10)]. The mean Lysholm score at follow-up was 68 (± 22). No significant differences were found between the osteoarthritis- and non-osteoarthritis group. CONCLUSION: Eight out of ten patients return to sport and nine out of ten patients return to work after DFO. These are clinically relevant findings, because they further justify DFO as a surgical alternative to KA in young, active knee OA patients who wish to return to high activity levels. LEVEL OF EVIDENCE: Retrospective cohort study, Level III.